Specifications; Before Assembly - Schwinn Airdyne AD6 International model Assembly Manual

Machine Weight:
Power Requirements:
Operating Voltage:
Maximum User Weight:
Regulatory Approvals:
This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class S
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 187.2 cm (73.7") x 248.2 cm (97.7").
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
52.2 kg (115 lbs.)
2 AA Batteries (LR6)
1.0 - 3.3VDC
136 kg (300 lbs.)

SpECIfICATIONS

129.2 cm
( 50.9" )
126.3 cm
( 49.7" )
65.2 cm
( 25.7" )
5