Schwinn 250 Recumbent Bike Assembly Manual page 49

Unit rocks/does not sit
level
Pedals loose/unit difficult
to pedal
Clicking sound when
pedaling
Seat post movement
Check leveler adjustment
Check surface under unit
Check pedal to crank arm
connection
Check crank arm to axle
connection
Check pedal to crank arm
connection
Check locking pin
Check adjustment knob
Adjust levelers until bike is level.
Adjustment may not be able to com-
pensate for extremely uneven surfaces.
Move bike to level area.
Pedal should be tightened securely
to crank. Be ssure connection is not
cross-threaded.
Crank should be tightened securely to
axle. Be sure cranks are connected at
180 degrees from each other.
Remove pedals and reattach.
Be sure adjustment pin is locked into
one of the seat rail adjustment holes.
Be sure knob is securely tightened.
49