User Setup Mode - Schwinn 250 Recumbent Bike Assembly Manual

Schwinn Advantage
The Schwinn 50 Series console lets you store and use 2 User profiles. The User profiles automati-
®
cally record the workout results for each User profile, and lets you view your workout data.
The User profile stores the following data:
• Name—up to 19 characters
• Age
• Weight
• Gender
• a Custom Workout (program profile)
• Total time (last workout, average, and total)
• Average speed (last workout, average, and total)
• Total distance (last workout, average, and total)
• Total calories (last workout, average, and total)
• Total workouts
Note: Push the STOP button to go back to the previous screen.
Add User Profile
1. From the Power-Up Mode screen, push the Schwinn Advantage
onds to go to User Setup Mode.
Note: If no User Profile is set up, the Console will show the Name prompt for User 1. If a User
Profile does exist, use the Increase/ Decrease buttons to select Create User 2 and push
START/ENTER.
2. The Console display shows the "ENTER NAME" prompt. Push START/ENTER.
3 Enter a name for the user. Use the Increase/Decrease buttons to move through the alphabet
and blank space (found between A and Z). To set each letter, push the START/ENTER button.
Push the STOP button to go back to the previous letter.
Push and hold the START/ENTER button for 3 seconds to complete the entry and go to the
next data prompt.
4. The Console display shows the "AGE 30" prompt. Use the Increase/Decrease buttons to
adjust the default value, and push START/ENTER to complete the entry and go to the next
prompt.
5. The Console display shows the "WEIGHT 150" prompt. Use the Increase/Decrease buttons
to adjust the default value, and push START/ENTER to complete the entry and go to the next
prompt.
32

User Setup Mode

™
button and hold for 3 sec-
™