Maintenance - Schwinn 270 Journey 2.5 Recumbent Bike Assembly Manual

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the
necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer
supplied components can be used to maintain and repair the equipment.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning,
maintaining or repairing the machine. Place the power cord in a secure location.
Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn
parts. Do not use if found in this condition. Repair or replace all parts at the first sign
of wear or damage. After each workout, use a damp cloth to wipe your machine and
Console free of sweat.
Note: Avoid excessive moisture on the Console.
Weekly: Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for
smooth seat slider operation. If needed, apply a very thin coating of silicone lube to
ease operation.
Note: Do not use petroleum based products.
Monthly Check pedals and crank arms and tighten as necessary. Make sure all bolts and
or after 20 hours: screws are tight. Tighten as necessary.
NOTICE: D o not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of
moisture.

maInTenanCe

37