Reebok 410 Bike Manual page 9

3. Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 110mm Screws (53).
4. Orient the Upright (4) and the Shield Cover (7)
as shown. Slide the Shield Cover upward onto
the Upright.
Have a second person hold the Upright (4)
and the Shield Cover (7) near the front of the
Frame (1).
Locate the wire tie inside the Upright (4). Tie the
lower end of the wire tie to the Main Wire (58).
Pull the other end of the wire tie upward until the
Main Wire (58) is routed through the Upright (4).
3
3
53
4
9
1
4
7
Wire Tie
58
1