Reebok 410 Bike Manual page 10

5. Tip: Avoid pinching the wires. Slide the
Upright (4) onto the Frame (1). Attach the
Upright with four M10 x 15mm Screws (65) and
four M10 Washers (31); start all four Screws,
and then tighten them.
Do not press the Shield Cover (7) into place
yet.
6. Orient the Seat Post (6) as shown, and insert it
into the Frame (1).
Then, slide the Shield Cover (7) downward and
press it onto the Right and Left Shields (10, 11).
5
Avoid pinching
the wires
7
6
6
1
10, 11
10
4
65
31
31
65
1
7