Pro-Form 535 User Manual page 10

When you are finished exercising, stop the
6
walking belt and remove the key.
Step onto the foot rails, slide the speed control to
the RESET position, and remove the key from the
console. The displays will turn off about six minutes
after the key is removed. Note: Any time that the
walking belt is stopped and the ON/RESET but-
ton is not pressed for six minutes, the displays
will automatically turn off in order to conserve
the batteries.
HOW TO SELECT KILOMETRES AND MILES
The console can display distance and speed in either
kilometres or miles. To change the unit of measure-
ment, first UNPLUG THE POWER CORD. Next, re-
move the six screws attaching the console to the con-
sole base. Lift the console a few inches, being careful
not to pull on the wires, and turn the console over.
10
Locate the small switch on the back of the console.
Move the switch upward or downward to select kilome-
tres or miles. Re-attach the console to the console
base. After changing the unit of measurement, re-
move one of the batteries from the console for
about five seconds and then reinsert it. This will
reset the console.
Screws
Screws
Switch