Quick Start - GE DPGT750EC/GC Technical Service Manual

Quick Start

Getting Clean the lint filter.
Started
IMPORTANT: Clean the lint filter each time
you use the dryer.
If the Touch
Add clothes. Do not overload. This wastes
Screen is
energy and promotes wrinkling.
dark, press
Select one of the four drying methods from the
POWER or
Home Screen:
the Touch
• Press BY FABRIC to dry according to fabric
Screen to
type.
access the
• Press BY GARMENT to dry according to
dry cycles
clothing type.
menu.
• Press SPECIAL CYCLES to dry nongarment
items, to dry without heat or to dry using the
drying rack.
• Press TIMED DRY to specify a drying time
and temperature.
Change any of the automatic settings, if
desired, by pressing the Touch Screen and
following the on-screen instructions.
By changing the settings you can:
• Change the level of dryness
• Change the drying temperature
• Set a Delay Start or Extended Tumble, or
change the End-of-Cycle Signal volume
• Adjust time settings
Close the door and press START.
The dryer will not operate unless the door is
closed.
Washer If the Washer/Dryer Communication features
of your washer and dryer are turned ON, your
Communicated
dryer will receive cycle information from your
Cycles
washer to create a dry cycle that matches your
wash load.
After the wash cycle is complete,
communication begins once either the washer
or dryer Touch Screen is activated.
Once the information is received, your dryer
can then create the optimal dry cycle for your
load. You can then change any of the
automatic cycles, as desired.
NOTE: For some communicated wash cycles,
your dryer will prompt you to select a FABRIC
TYPE.
See "Final Setup" in the Installation
Instructions for attaching the serial cable for
Washer/Dryer Communication.
TOUCH TO SELECT
FABRIC
BY
SPECIAL
SUMMARY SCREEN
COTTONS
CYCLE
OPTIONS
SENDING INFO TO DRYER...
Washer Display
– 8 –
DRY CYCLE
GARMENT
BY
TIMED DRY
CYCLES
Home Screen
MORE DRY
DRYNESS TEMP
TIME
0:36
S
TART
S
TOP
RECEIVING...
Dryer Display