Control Quick Start Cycles - GE Profile DPSB650 Technical Service Manual

Control Quick Start Cycles (Model DPSB650)
Clean the lint filter.
IMPORTANT: Clean the lint filter each
time you use the dryer.
Add clothes. Do not overload. This wastes
energy and causes wrinkling.
Select one of the three drying methods:
■
Press SENSOR CYCLES to dry according
to load type
■
Press GARMENT CYCLES to dry
according to clothing type
■
Press TIMED DRY to specify dry time
Select the dry cycle by pressing the
arrow pads (
display. You can scroll up and down
through the list of cycles by pressing the
UP ( ) and DOWN (
beneath the display.
For TIMED DRY, you can use either the
display or the SET TIME arrow pads to set
the drying time.
NOTE: Any time you make a selection that
is incompatible with the chosen dry cycle,
the dryer will beep twice.
Change any of the automatic settings,
if desired, by pressing the pad beneath
the setting.
■
For best performance, adjust load size
to appropriate setting
■
Dryness level determines how dry your
clothes will be at the end of the cycle
■
Adjust temperature as recommended
on the fabric manufacturer's care label
Close the door and press START.
) at the sides of the
) arrow pads
– 6 –