Auto Preset - Denon AVR-1312 Owner's Manual

Auto Preset

Use the auto preset function to program radio stations.
Setting items
Start
If an FM station cannot be preset automatically, select the desired
Start the auto preset
station by tuning it in manually, then preset it manually.
process.
TUNER
Preset Skip
Set the preset memory block (from A to G) you do not want to display.
Setting items
Block A – Block G ON : Display the selected preset memory block.
Select a block to be skipped SKIP : Do not display the selected preset memory block.
from among preset blocks
(from A to G).
TUNER
Video Select
Setting items
Video Select Source : Play the picture and sound of the input source.
Video of another input DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. This
source is played back can be set for individual input sources.
combined with the playing
NOTE
audio.
It is not possible to select HDMI input signals.
BD
Setting details
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Input Mode
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input (OPTICAL/COAXIAL).
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
• If an input source is "BD", "GAME", "DOCK", "DVD" or "V.AUX",
to "Auto".
"Digital" can be selected by assigning "Input Assign"
to "OPTICAL" or "COAXIAL" (Selectable items differ depending on the
input source.).
If an input source is "TUNER", the setting is fixed to "Analog".
• If the input source is set to "BD", "TV" or "GAME", it cannot be set to
"Analog".
• When digital signals are properly input, the
the display. If the
connector assignment and the connections.
Auto : Detect type of digital input signal and decode and play automatically.
Decode Mode
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
BD DVD TV
• This item can be set for input sources for which "OPTICAL" or
SAT/CBL GAME
"COAXIAL" is assigned at "Input Assign" (vpage 33).
V.AUX DOCK
• This item can be set for HDMI input sources (BD, DVD, SAT/CBL or
GAME).
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
34
Input Setup
Default settings are underlined.
Setting details
(vpage 33)
indicator lights on
indicator does not light, check the digital input