Denon AVR-1312 Owner's Manual page 42

Setting items
Center Image 0.0 – 1.0 (0.3)
Assign center channel
"Center Image" is displayed when the surround mode is set to "DTS
signal to front left and right
NEO:6 Music".
channels for wider sound.
Panorama ON : Set.
Assign front L/R signal also OFF : Do not set.
to surround channels for
"Panorama" is displayed when the surround mode is set to "PLgx
wider sound.
Music" or "PLg Music".
Dimension 0 – 6 (3)
Shift sound image center
"Dimension" is displayed when the surround mode is set to "PLgx
to front or rear to adjust
Music" or "PLg Music".
playback balance.
Center Width 0 – 7 (3)
Assign center channel
"Center Width" is displayed when the surround mode is set to "PLgx
signal to front left and right
Music" or "PLg Music".
channels for wider sound.
ON : Set.
AFDM
(Auto flag detect mode) OFF : Do not set.
Detect the source's
[Example] Playing Dolby Digital software (with EX flag)
surround back channel
• When "AFDM" is set to "ON", the surround mode is automatically set
signal and set the
to the DOLBY D + PLgx C mode.
optimum surround mode
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
automatically.
"Audio Adjust" – "SB CH OUT" to "MTRX ON".
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when "AFDM" is set to
"ON", set "Audio Adjust" – "SB CH OUT" to "MTRX ON" or "PLgx
C".
Low / Mid / High : These set the compression level.
D.Comp
Compress dynamic range OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
DRC Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Mid / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression always off.
BD
Setting details Setting items
n For 2-channel sources
SB CH OUT
Sets the method of
ON : The surround back channel is used.
generating of the surround
OFF : No signal is played from the surround back channels.
back channel.
n For multi-channel sources
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
ES MTRX
surround channel signals of the DTS source.
ES DSCRT
6.1-channel DTS source.
PLgx C
the signals in the Dolby Pro Logic gx Cinema mode.
PLgx M : Generate and play the surround back signals by decoding the
signals in the Dolby Pro Logic gx Music mode.
OFF : Do not play the surround back channel.
z1 This can be selected when playing DTS sources.
z2 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z3 This can be selected when "Speaker Config." – "Surround Back"
(C page 5 "Speaker
If the source being played contains a surround back signal, the decoder
type is automatically selected by the AFDM function. Set "AFDM" to
"OFF" to switch to your preferred decoder.
NOTE
If the setting in "Speaker Config." – "Surround Back"
"Speaker
Subwoofer ON : The subwoofer is used.
Turn subwoofer output on OFF : The subwoofer is not used.
and off.
NOTE
This can be set when the surround mode is "DIRECT" (vpage 23) and
the "SW Mode"
Default Yes : Reset to the defaults.
The "Audio Adjust" settings No : Do not reset to the defaults.
are returned to the default
settings.
39
Adjusting the sound field effects
Setting details
z1
: Generate and play the surround back signals from the
z2
: Play the surround back signals included in the
z3
: Generate and play the surround back signals by decoding
Config.") is set to other than "None".
Config.") is "None", "SB CH OUT" is not displayed.
(C page 6 "Bass Setting") is "LFE+Main".
(C page 5