Selecting And Setting A Programme - Bosch HBA36B6.0W Instruction Manual

Pork
Joints with a crust should be placed in the dish with the crust
side up. Score the rind to make a grid-like pattern, without
cutting into the meat.
Programmes
Pork
Neck joint, fresh, boned
Neck joint, frozen, boned
Roast loin, fresh
Rolled roasting joint, fresh
Joint with crust, fresh, belly
Ham joint, fresh, cured, cook
Ham joint, fresh, cured, brown

Selecting and setting a programme

First choose a suitable programme from the programme table.
Example in the diagram: setting for pot-roasted beef, fresh,
programme 7, weight of meat 1.3 kg.
Press the ` button.
1.
The first programme number appears in the temperature
display.
Select the desired programme number using the rotary
2.
selector.
Press the button.
X
3.
A weight is suggested in the clock display.
Use the rotary selector to specify the weight of the dish.
4.
22
Place ham joints in the dish with the layer of fat facing upwards.
Cook in an uncovered dish until a brown crust forms.
When roasting joints of meat, set the weight of the meat. For
rolled roasting joints, set the total weight.
Programme Weight range in kg
number
P34 0.5-3.0
P35* 0.5-2.0
P36 0.5-2.5
P37 0.5-3.0
P38 0.5-3.0
P39 1.0-4.0
P40* 1.0-4.0
5.
The programme starts. You will see the cooking time [
counting down on the clock display.
The programme has ended
A signal sounds. The oven stops heating. You can cancel the
signal earlier by pressing the
Changing the programme duration
The duration of the programme cannot be changed.
Changing the programme
Once a programme has been started, it can no longer be
changed.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the
button again to continue operation.
Cancelling the programme
Press and hold
160 °C appear. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options - Setting a later
end time.
Add liquid
Yes
Yes
Yes
Yes
No
A little
No
Press the n button.
The programme length is shown.
n button briefly. The oven is paused. Press the
n button until the
Weight setting
Weight of meat
Weight of meat
Weight of meat
Total weight
Weight of meat
Weight of meat
Weight of meat
[r
0 button.
< symbol for 3D hot air and
]
n