Installation; Unpacking - Bosch VDN-5085 Installation Manual

12 en | Installation
3

Installation

3.1

Unpacking

Unpack carefully and handle the equipment with care.
The packaging contains:
–
–
–
–
–
–
–
If equipment has been damaged during shipment, repack it in
the original packaging and notify the shipping agent or supplier.
WARNING!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
NEC800 (CEC Section 60) or applicable local codes.
CAUTION!
The camera module is a sensitive device and must be handled
carefully.
AM18-Q0648 | v1.0 | 2013.03
FLEXIDOME 5000 camera
Important safety instructions
Quick install instructions
CD-ROM
– Installation instructions
– Adobe Acrobat Reader
Plastic bag with mounting hardware (three SX8 4.5-6 mm
mounting plugs and three matching mounting screws), and
special screwdriver bit for tamper-resistant screws
Plastic bag with two black rubber grommets for surface
mount box
Lens adjustment cap
Installation Manual
FLEXIDOME 5000 AN
Bosch Security Systems