Synchronization Submenu; Connections Submenu - Bosch VDN-5085 Installation Manual

FLEXIDOME 5000 AN
5.6.3

Synchronization submenu

Item
Synchroniza-
tion
Vertical phase
EXIT
5.6.4

Connections submenu

Item
Heater
Bilinx Comms.
Cable
compensation
Compensation
level
EXIT
Bosch Security Systems
Selection
Internal
Line lock
0, 1, ... 359
Selection
Off, Auto
On, Off
Off, Default,
RG59, RG6
0,1,2 . . .+15
Installation Manual
Description
Internal - for free running camera
operation.
Line lock - to lock to the AC power
supply
Adjusts the vertical phase offset (when
in LINE LOCK mode and a valid power
supply frequency is detected).
Returns to Install menu.
Description
Select Auto to enable the
thermostatically controlled heater
function. The heater switches on at
approximately 0°C (+32°F).
If Off, Bilinx communications is
disabled.
Cable compensation is used to avoid
the need for amplifiers in long distance
coaxial connections up to 1000 m
(3000 ft). For optimum results select
the coaxial cable type used or, if
unknown, select default.
Sets the level of cable compensation
Returns to Install menu.
Configuration | en
AM18-Q0648 | v1.0 | 2013.03
41