Feed Chute Removal And Replacement - Rexel S16 Service And Parts Manual

FEED CHUTE REMOVAL AND REPLACEMENT

1. Remove the two plastic screw covers (1, fig. 1) by prising upwards with s screwdriver.
2. Remove the two set screws (2, fig. 1), lift front of feed chute, slide forward to unplug at the
rear and lift free.
3. Assemble in reverse sequence.
4. NOTE: if replacing feed chute the two plugs (3, fig.1) can be removed and refitted to a
new feed chute by removal of nuts and washers (4,5,6, fig.1).
ISSUE 2
PAPER SHREDDER 16
SERVICE INSTRUCTIONS
MARCH 97
SECTION 2
PAGE 3