Table of Contents
Advertisement
OPERATION INSTRUCTIONS (CONTINUED)
FUNCTION
ON TIMER
TIMER/
CANCEL
Push the 'TIMER/CANCEL'
button when unit is off.
(REMOCON ONLY)
SLEEP MODE
SLEEP
Push the 'SLEEP' button in
'COOLING' mode.
(REMOCON ONLY)
• ROOM TEMPERATURE DISPLAY.
Over 45°C or 100°F
5°C~45°C or 41°F~99°F
Below 5°C (41°F)
OPERATION
1. Timer is changed to as follows
by pushing "TIMER/CANCEL"
button.
(1hr 2hr 3hr 4hr 5hr 6hr
8hr 10hr 12hr 16hr 20hr
24hr cancel)
2. The unit starts working after set
time is over in cooling mode with
last temperature set.
3. If you want to cancel timer, push
this button again at any time.
1. SLEEP MODE is changed as
follows by pushing "SLEEP"
button. (L1 L2 cancel)
* L1 Mode
– The unit is off after 4 hours.
– The desired Temp is in
creased 3°C (5.4°F) for 4
hours.
– Auto swing is selected.
– Fan speed is set to 'LOW'.
* L2 MODE
– The unit works as follow.
+1 C
+1 C
ON
OFF
2hr
2hr
2hr
2hr
2hr
– Auto swing is selected.
– Fan speed is set to 'LOW'.
2. Set proper desired room
temperature, fan speed and
auto-swing mode.
3. This mode can be selected in
'COOLING' mode only.
DISPLAY TEMPERATURE
8
DISPLAY
1. 'TIMER' lamp lights.
2. Setting time is displayed.
FAN
ROOM TEMP
TURBO
DESIRED TEMP
COOLING
TIMER
3. After a few seconds, display is
changed to current room
temperature. and 'ROOM
TEMP' lamp lights.
1. 'L1' or 'L2' is displayed.
2. 'ROOM TEMP' and 'DESIRED
TEMP' lamp is off.
Advertisement
Table of Contents
