Table of Contents
Advertisement
OPERATION INSTRUCTION(CONTINUED)
FUNCTION
POWER ON
or
POWER
Push POWER button
COOLING MODE
MODE
or
MODE
Push the 'MODE' button until
'COOLING' lamp lights.
Change desired room
temperature
or
TEMP
Push the 'TEMP
' button.
Change 'FAN SPEED'
FAN SPEED
FAN
or
SPEED
Push the 'FAN SPEED'
button.
OPERATION
1. The unit starts working.
(It is delayed 3 minutes after
main power source is supplied.)
2. Default mode is 'COOLING'
mode.
3. Default desired room
temperature is '26°C'.
And fan speed is 'HIGH'.
1. Operating modes are changed
as follows by pushing "MODE"
button.
(COOLING TURBO FAN
COOLING)
2. The compressor and fan work.
3. In this mode you can change
fan speed and desired
temperature at any time.
4. SLEEP mode and ON/OFF
TIMER can be selected.
(By remocon button only)
1. The desired room temperature
is changed within a range from
16°C to 32°C by 1°C.
TEMP
1. FAN SPEED is changed as
follows by pushing "FAN
SPEED" button.
(HIGH MID LOW HIGH)
1. Current room temperature is
displayed.
2. 'COOLING' lamp lights.
3. 'ROOM TEMP' lamp lights.
1. Current room temperature is
displayed.
2. 'COOLING' lamp lights.
3. 'ROOM TEMP' lamp lights.
1. It display desired room
temperature when 'TEMP'
button is pushed.
2. 'DESIRED TEMP' lamp lights.
3. After a few seconds, display is
changed to current room
temperature and 'ROOM TEMP'
lamp lights.
1. It displays as follows.
2. After a few seconds, display is
changed to current room
temperature.
6
DISPLAY
FAN
ROOM TEMP
TURBO
DESIRED TEMP
COOLING
TIMER
FAN
ROOM TEMP
TURBO
DESIRED TEMP
COOLING
TIMER
FAN
ROOM TEMP
TURBO
DESIRED TEMP
COOLING
TIMER
HIGH
MID
LOW
Advertisement
Table of Contents
