Advertisement
Zoneline units
* A-B Series: Zoneline units built before 1987 – Zoneline I, II, III, and IV; AZC Series: Zoneline units built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 3000,
4000, 5000; AZ Series: Zoneline units built after 1992 – Zoneline 2100, 3100, 2600, 5100 / Zoneline 2200, 3200, 5200 / Zoneline 2500, 3500, 5500 / Zoneline 2800, 2900, 3800, 3900, 4100,
5800, 6100, 7500, 8500.
RAB71A (All Zoneline Series)
Standard Wall Case
The RAB71A is a galvanized steel wall sleeve with expanded polystyrene
foam insulation. It is mechanically fastened and protected with baked-
on enamel and protected with a sealing compound to prevent rust. The
RAB71A wall case accepts all Zoneline chassis models.
Also available with extended depths:
• RAB7116—16" deep
• RAB7128—28" deep
• RAB7124—24" deep
• RAB7131—31" deep
RAB77A4 (All Zoneline Series)
SMC Wall Case
The Zoneline SMC universally designed wall case by GE utilizes a
fiberglass-reinforced polyester compound to produce a durable,
non-corrosive wall case for all Zoneline Packaged Terminal Air
Conditioners and Heat Pumps. The RAB77A4 SMC wall case
accepts all Zoneline chassis models.
RAD10 (All Zoneline Series)
Internal/External Drain Kit
For more positive control of condensate water, the RAD10 drain kit
routes condensate to the exterior or to the interior of the building
through the wall case. Suitable provision (field applied) should be
made to connect the RAD10 drain tube to a drain system in the
building. Drain tube assemblies are 1/2" OD copper and consist
of a short right-angle tube and a 6"-long straight tube to suit the
particular application.
RAF452 (AZ Series*—2200, 3200 and 5200 only)
Replacement Standard Room Cabinet
Room cabinet with wraparound design has attractive textured finish
which matches unit sleeve. Cabinet is injection-molded of high-impact
polystyrene. Cabinet fastens to chassis without tools or hardware. The
room cabinet contains the slide-out filters and 2-position reversible
discharge louvers.
RAF452A (AZ Series*—2500, 3500 and 5500 only)
Replacement Standard Room Cabinet
Room cabinet with wraparound design has attractive textured finish
which matches unit sleeve. Cabinet is injection-molded of high-impact
polystyrene. Cabinet fastens to chassis without tools or hardware. The
room cabinet contains the slide-out filters and 2-position reversible
discharge louvers.
7
Advertisement
