Advertisement
Built-in units
18
RAK1072 Hotpoint
Chassis Sleeve Adapter
®
Kit adapts Hotpoint ACXB 10 and ACXB 11 wall case (used with ACTB
chassis) to the sloped-front or rounded-front "J" chassis. Existing case
dimensions are 25-3/4" W, 16-7/8" H, 18-5/8" D.
All needed gaskets and hardware, including the outdoor grille, are
included.
RAK1082 Whirlpool
Sleeve Adapter
®
Kit adapts Whirlpool Type 23W wall case for installation of the sloped-
front or rounded-front "J" model chassis. The Whirlpool case
dimensions are 25-7/8" W, 16-1/2" H, 23-1/8" D.
RAK1102/RAB30 (F Model) Sleeve Adapter
Kit adapts RAB30 wall case for installation of the sloped-front or
rounded-front "J" model chassis. The RAB30 case dimensions are 26"
W, 18" H, 24" D.
RAK123A64 Fedders
Sleeve Adapter
®
Kit adapts Fedders "A" wall case for installation of the "J" wall case
(includes outdoor grille) and "J" model chassis. Existing Fedders wall
case dimensions are 27" W, 16-3/4" H, 16-3/4" D.
Kit consists of four gaskets which are applied to the wall case
to assure a tight weather seal between the two cases.
Advertisement
