Advertisement
Built-in units
RAG13 Stamped Aluminum Exterior Grille "J" Series
Used to replace exterior grille on old "J" wall case to maximize
efficiency and capacity of new chassis. The grille is included with new
wall cases RAB46, 47 or 48.
RAG14E Architectural Louvered Exterior Grille
for "J" Series
Extruded aluminum grille for application with RAB46, 47 or 48.
NOTE: The RAG14E exterior grille is NOT compatible with the RAD4A1
EXTERNAL drain tube. Use of this grille would require the use of the
INTERNAL TUBE configuration to drain the unit.
RAF622 Replacement Room Front for Rounded-
Front "J" Chassis
Used as replacement grille for rounded-front "J" chassis units. (Not for
use with high-mount units.)
RAF622A Replacement Room Front for Rounded-
Front "J" Chassis
Replacement room front for "J" series chassis with oval control knob
opening. (Not for use on high-mount models.)
RAK690 Architectural Louver Grille Adapter for
"J" Chassis Units
Permits most existing architectural louvered grilles to be used with
sloped-front or rounded-front "J" chassis units. Kit consists of two wire
mesh screen sections, clips to attach screen to existing wall case and
two aluminum air deflectors to be mounted to new chassis.
17
Advertisement
