Turn On/Off The Scanner - VuPoint Magic Wand PDS-ST470-VP User Manual

the microSD memory card:
1. Turn OFF the scanner.
2. Insert the microSD card into the microSD card slot (with metal side facing upwards). Gently press in until
the card is clicked in and latched.

4.3 Turn on/off the Scanner

Turn on/off the scanner by pressing and holding
Note:
If the scanner is turned on for the first time, it will enter Date & Time/Language setup mode. Once the Date &
Time/ Language setting is completed, scanner will enter into standby mode.
By default, Auto-off feature is set to 3 minutes. If the Auto-off feature is set at "3 Min" (refer to section 4.7),
the scanner will automatically turn off if scanning action is not detected within 3 minutes.
To set Date & Time/Language:
1. Press
When setting up the value for MINUTE, press
reaches the YEAR option.
2. Press or
3. Press to confirm and move to next setting.
4. After completing the setting for MINUTE, it will enter Language setup screen.
5. Press
6. Press
to jump to next setting option: YEAR
to set the figure corresponding to each setting.
or to select your desired language.
to confirm and enter into standby status.
.
MONTH DATE
to switch to the previous setting option until it
6
HOUR MINUTE.