Delete All (Delete All Files); Format The Microsd Memory Card; To Calibrate; Device Information - VuPoint Magic Wand PDS-ST470-VP User Manual

Delete All
Format
Device Info

4.8 How to Calibrate the Scanner

Note: If the scanned images are too dark or too bright, you may need to calibrate your scanner by adjusting the
white balance. Follow the below steps to perform calibration:
1. Wipe off any dirt on the surface of the scanning lens with the clean dry cloth provided.
2. Press
paper provided.
3. Press and hold
both buttons to enter into auto-calibration mode. The message "1. Calibration starts. Do not move the
device!" will appear on LCD screen.
4. Do not move the scanner until "2. Scan the calibration sheet!" appears on the LCD screen. Start scanning
the white area of the calibration paper by sliding the scanner across the paper (slide the scanner
backwards if necessary).
5. "3. Calibration completed!" message will appear on the LCD screen when calibration is completed.
6. Press any button to power off the scanner.

5.Connecting to Computer

View your scanned files on your comptuer
You may also connect your scanner to your computer and view pictures on the computer monitor
1. Press and hold
computer to enter into USB mode. "USB" icon will display on LCD screen.
2. Your computer will recognize the scanner as a "Removable Disk". Click
"Open folder to view files" to view, import, copy, move or to delete scanned
files.
Delete All Files

Format the microSD Memory Card

Note: All contents on microSD card
will be erased during formating

Device Information

turn on the scanner. Place the scanner on the white area of the White Balance Calibration
button. While holding the
to turn on your scanner, connect your scanner to your
No
Yes
No
Yes
/
button, press the
11
button and then release