Dhcp Server Configuration - ADTRAN Mitel IP Installing & Configuring

Enabling Support for Mitel SIP Phones
1. Run the Server Configuration Wizard by selecting Start > All Programs > UC Server >
Server Configuration Wizard.
2. Select Phone Types.
3. Select Next.
4. Select the check box next to Mitel (see the figure below).
5. Continue through the wizard by selecting Next at each page until the wizard is finished.

DHCP Server Configuration

When a Mitel phone is plugged into the network, it retrieves its IP address from the Dynamic Host
Configuration Protocol (DHCP) server. It also checks one of the options for the IP address of the Trivial
File Transfer Protocol (TFTP) provisioning server. If this option is not present, Mitel phones do not
automatically upgrade their firmware, nor are they automatically provisioned.
To configure the DHCP server for Windows® Server 2003/2008 and Windows Small Business
Server (SBS):
1. Select Start > Control Panel > Administrative Tools > DHCP.
2. Right-click the domain where you want the Mitel phones to be provisioned and select Set
Predefined Options.
3