ADTRAN Mitel IP Installing & Configuring page 6

4. When you see the password prompt, enter admin as the user name and the phone model as the
password. For example, if you have a 5224 series phone, enter 5224 as the password.
5. Select the Firmware Update link under Admin Tools.
6. Under Manual Firmware Update enter the following:
Choice of Manual download enter
TFTP server
7. Select Update.
8. While the phone is booting, an option to upgrade using TFTP appears. Select yes. You might
have to press * for yes, depending on the phone.
You can now see the firmware upgrading. After it is complete, the date and time will appear on the phone.
Verification
After the phone firmware finishes upgrading and booting and the phone is in an idle state, check to see if
the phone is automatically detected by the UC server.
To check that the phone is automatically detected:
1. Launch the UC client by selecting Start > All Programs > UC Client.
2. Log in as the admin user or a user with administrator access.
3. Select the Admin tab, select the Administration menu, and then select Phones.
4. Sort by the medium access control (MAC) address column and search for the instance of the
Mitel phone that you connected to the network. The phone's MAC address is printed on the
bottom of the phone.
If the phone does not appear in the list, refer to the troubleshooting section at the end of this document.
Adding an Identity
You must either have an available identity you can add to the phone, or you must create a new
identity/user for the phone. For more information about how to create users and identities in the UC
server, refer to NetVanta UC Server Administrator Guide–Enterprise Communications Edition available
online at http://kb.adtran.com.
Associating an Identity with the Phone
After you install the phone and create a user/identity, you must associate that identity with the phone.
To associate the identity with the phone:
1. Launch the UC client by selecting Start > All Programs > UC Client.
2. Log in as the admin user or a user with administrator access.
TFTP
IP address of the UC server (for example,
123.45.67.89)
6