Access Led On The Optical Disk Drive; Lan Connector Led - NEC Express5800 320Fd-MR User Manual

Access LED on the Optical Disk Drive

This LED illuminates when the installed DVD or CD-ROM is being accessed.

LAN Connector LED

 LINK/ACT LED
The LINK/ACT LED shows the status of a standard network port. It is green if power is
supplied to the main unit and hub, and they are connected correctly ("LINK"). It blinks green
while the network port sends or receives data (ACT).
When the LED does not illuminate during "LINK," check the condition and connection of
network cables. If there is nothing wrong with the cables, a defect is suspected in the network
(LAN) controller. In this case, contact your sales agent.
 Speed LED
This LED indicates the network interface of the communication mode used by a network port.
1000BASE-T and 100BASE-TX are the supported LAN port types. When this LED illuminates
in amber, the port is operating on 1000BASE-T; when in green, 100BASE-TX; and when not
illuminate, 10BASE-T.
General Description 2-17