Security Menu - NEC Express5800 120Ld User Manual

Security Menu

Note:
a password for entering Setup. The passwords are not case
sensitive.
Feature
Supervisor
Password is
User Password is
Set Supervisor
Password
Set User
Password
Password on Boot
Diskette Access
Secure Mode
Power Switch
Mask
Option ROM
Menu Mask
Processor Serial
Number
3-12 Configuring Your System
Enabling the Supervisor Password field requires
Choices or
Display Only Description
Clear
Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (see System Board
Jumpers in this Chapter).
Clear
Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (see System Board
Jumpers in this Chapter).
Press ENTER Supervisor password controls
access to the setup utility.
When the <Enter> key is pressed,
the user is prompted for a
password; press ESC key to
abort. Once set, this can be
disabled by setting it to a null
string, or by clearing password
jumper on system board (refer to
System Board Jumpers in this
chapter).
Press ENTER
When the <Enter> key is pressed,
the user is prompted for a
password; press ESC key to
abort. Once set, this can be
disabled by setting it to a null
string, or by clearing password
jumper on system board (refer to
System Board Jumpers in this
chapter).
Disabled Disables or enables password
Enabled entry on boot.
Everyone Controls access to diskette drives.
Supervisor
Masked Determines whether power switch
Unmasked is masked or unmasked.
Unmasked Determines whether Option ROM
Masked Menu Mask is masked or
unmasked.
Disabled
Determines whether Processor
Enabled Serial Number feature is enabled
or disabled.
Your Setting