Stop Faxing - Brother MFC-J3520 User Manual

Chapter 4
(Advanced User's Guide)
For more advanced fax-sending
operations and settings
(see Advanced User's Guide: Sending a
fax).
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Faxing at the end of a call
 Broadcasting
 Real Time Transmission
 Overseas Mode
 Delayed Fax
 Batch Transmission
 Cancelling Waiting Jobs
 Polled Transmit
d
Enter the fax number.
Using the dial pad
Using (Address Book)

Address Book
Using (Call History)

Outgoing Call

Caller ID history
(Only available for some countries.)
NOTE
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 50.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See Software and Network User's
Guide.)
48
e
Press Fax Start.
Faxing from the ADF
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass
 If you choose Mono in the
Colour Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Colour in the
Colour Setting, the
Touchscreen asks if you want to
send a colour fax. Press
Yes (Colour fax) to confirm.
The machine starts dialling and
sending the document.
f
When the Touchscreen asks you
Next page?, do one of the following:
 To send a single page, press No.
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)

Stop faxing

To stop faxing, press
4
4
4
.