Using The Scanner Glass - Brother MFC-J3520 User Manual

d
Place your documents in the ADF face
up, short edge first until you feel them
touch the feed rollers.
The Touchscreen will display
ADF Ready.
 When using ADF High Speed
Mode in Copy and Scan mode
Make sure your document size is A4
or Letter.
Place your documents in the ADF
face up, long edge first until you
feel them touch the feed rollers.
The Touchscreen will display
ADF Ready.
NOTE
ADF High Speed Mode is available with
Copy and Scan mode. For more
information about ADF High Speed Mode,
see the following:
• (Copy)
ADF High Speed Mode copying
on page 84
• (Scan)
ADF High Speed Mode scanning
on page 99
IMPORTANT
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.

Using the scanner glass

You can use the scanner glass to fax, copy or
scan single pages or pages of a book.
Document Sizes Supported
Length: Up to 431.8 mm
Width: Up to 297 mm
Weight: Up to 2 kg
How to load documents
NOTE
To use the scanner glass, the ADF must
be empty.
a
Lift the document cover.
Loading documents
45
3
3
3
3