Sending A Fax; How To Send A Fax - Brother MFC-J3520 User Manual

4

Sending a fax

How to send a fax

The following steps show how to send a fax.
a
Do one of the following to load your
document:
 Place the document face up in the
ADF. (See Using the ADF
on page 44.)
Load your document face down on

the scanner glass. (See Using the
scanner glass on page 45.)
NOTE
• To send colour faxes with multiple pages,
use the ADF.
• If you send a mono fax from the ADF when
the memory is full, it will be sent in real
time.
• You can use the scanner glass to fax
pages of a book one at a time. The
documents can be up to A3 or Ledger
size.
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple-page document.
b
Do one of the following:
4
 When Fax Preview is set to Off,
press
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
 The Touchscreen shows:
c
You can change the following
fax-sending settings. Press Options.
Press a or b to scroll through the fax
settings. When the setting you want is
displayed, press it and choose your new
option. When you have finished
changing options, press OK.
(Basic User's Guide)
For information about changing the
following fax-sending settings, see
pages 49 to 51.
Glass Scan Size

 Colour Fax Transmission
 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
(Fax).
4
4
47