Rear View - Lenovo ThinkServer RD120 Type 6444 Installation Manual

Hide thumbs Also See for ThinkServer RD120 Type 6444:
Table of Contents

Advertisement

being rebuilt as part of a RAID configuration. When the LED is flashing rapidly
(three flashes per second), it indicates that the controller is identifying the drive.
CD/DVD-eject button: Press this button to release a CD or DVD from the
CD-RW/DVD drive.
CD/DVD drive activity LED: When this LED is lit, it indicates that the CD-RW/DVD
drive is in use.
Rack release latches: Press these latches to release the server from the rack.

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
Attention:
the dc power supply for information about the power-supply LEDs.
Power-cord connector (ac power supply only): Connect the power cord to this
connector.
Attention:
Lenovo service technicians are authorized to connect or disconnect power to the dc
power supply. See the documentation that comes with each dc power supply.
AC power LED: Each hot-swap power supply has an ac power LED and a dc
power LED. When the ac power LED is lit, it indicates that sufficient power is
coming into the power supply through the power cord. During typical operation, both
the ac and dc power LEDs are lit. For any other combination of LEDs, see the
Hardware Maintenance Manual on the ThinkServer Documentation DVD.
DC power LED: Each hot-swap power supply has a dc power LED and an ac
power LED. When the dc power LED is lit, it indicates that the power supply is
In a dc power environment, see the documentation that comes with
1
Power cord connector 1
2
AC power LED
3
DC power LED
4
Power supply filler panel
5
Systems-management Ethernet
connector
6
Ethernet activity LEDs
7
Ethernet link LEDs
8
Ethernet connector 1
9
USB connector 4
10
USB connector 3
In a dc power environment, only trained service personnel other than
11
Ethernet connector 2
12
USB connector 2
13
USB connector 1
14
Video connector
15
System-error LED
16
System-locator LED
17
Power-on LED
18
Serial connector
19
SAS connector
20
Power supply 1
Chapter 3. Server controls, LEDs, and power
37

Advertisement

Table of Contents
loading

Table of Contents