Changing The Pattern Length - Brother 885-U24 Operation Manual

—— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d Press
desired density is selected.
Select
compact stitching.
e Press
key).
The initial stitch screen appears again, and
the stitching density is changed.
CAUTION
● If the stitching density is too compacted,
depending on the needle, the stitches may
be bunched together, causing the needle
to break.

Changing the pattern length

The length of one part of a satin stitch can be set to
one of five sizes.
a Select a satin stitch (No. 32–47 of
selected with
b Press
panel.
The settings screen appears.
or (Stitch width keys) until the
for sparse stitching or select
(OK key) or (Cancel/clear
).
(Settings key) in the operation
c Press
is displayed.
for
The screen for changing the length of a satin
stitch appears.
d Press
desired ratio is selected.
The length can be set within the range of
and
• Press
pressed while the smallest setting (×1) is
displayed, a beep sounds.
• Press
pressed while the largest setting (×5) is
displayed, a beep sounds.
,
The satin stitch length is changed.
e Press
key).
The initial stitch screen appears again.
Sewing the Various Built-In Decorative Patterns 127
or (Stitch length keys) until
or (Stitch width keys) until the
.
to reduce the length. If the key is
to increase the length. If the key is
(OK key) or (Cancel/clear
3