Changing The Pattern Size; Changing The Pattern Length (7 Mm Satin Stitch Patterns Only); Creating A Vertical Mirror Image; Creating A Horizontal Mirror Image - Brother NX-2000 Operation Manual

Changing the Pattern Size

After selecting a stitch pattern, press
desired size is selected.
Memo
• Stitch patterns entered after the pattern size was
changed are added at the selected size until it is
changed again.
• You cannot change the size of stitch patterns once
they have been combined.
Actual size
L
S
Changing the Pattern Length
(7 mm Satin Stitch Patterns Only)
If 7 mm satin stitch patterns are selected, the pattern
length can be changed without changing the zigzag
width or stitch length. After selecting a stitch pattern,
press to select one of the five settings available.

Creating a Vertical Mirror Image

until the After selecting a stitch pattern, press
pattern vertically.

Creating a Horizontal Mirror Image

After selecting a stitch pattern, press
pattern horizontally.
EDITING STITCH PATTERNS
to flip the
to flip the
4
109