Table of Contents
Advertisement
When contacting the Maytag dealer, certain information is required to ensure proper service/parts information.
This information is on the data label, which is located on the upper left side panel area behind the top control
(access) door. When contacting the Maytag Co., please have the model number and serial number available.
1. MODEL NUMBER – Describes the size of the dryer and the type of heat (gas, electric, or steam).
2. SERIAL NUMBER – Allows the manufacturer to gather information on your particular dryer.
3. MANUFACTURING CODE NUMBER – The number issued by the manufacturer, which describes ALL possible options
on your particular model.
4. TYPE OF HEAT – This describes the type of heat for your particular dryer, gas (either natural gas or liquid propane [L.P.]
gas), electric, or steam.
5. HEAT INPUT (for GAS DRYERS) – This describes the heat input in British thermal units per hour (Btu/hr).
6. ORIFICE SIZE (for GAS DRYERS) – Gives the number drill size used.
7. ELECTRIC SERVICE – This describes the electric service for your particular model.
8. GAS MANIFOLD PRESSURE (for GAS DRYERS) – This describes the manifold pressure taken at the gas valve tap.
113201 - 7
SECTION VII
DATA LABEL INFORMATION
Maytag Co.
27
Advertisement
Table of Contents
