Using The Filter - Agilent Technologies U1253B Quick Start Manual

U1253B Quick Start Guide

Using the Filter

1 Press and hold
second to enter the multimeter's Setup
menu.
2 Press or
3 Press or
option.
4 Press
5 Press or
6 Press
save your changes and exit the Edit mode.
7 Press and hold
restarts and returns to its normal operating
mode.
To avoid possible electric shock or per-
CAU TI O N CAU TI O N
sonal injury, enable the Filter to verify
the presence of hazardous DC voltages.
Displayed DC voltages can be influenced
by high frequency AC components and
must be filtered to assure an accurate
reading.
for more than 1
to scroll to menu 6.
to browse to the DC Filter
to enter the Edit mode.
to enable the DC Filter.
for more than 1 second to
until the meter