Healthrider Pro H250i Treadmill User Manual page 7

2. Attach a Front Endcap (80) to the Base (81) with
an Endcap Screw (108).
Attach a Wheel Housing (86) to the Base (81)
with two 1" Tek Screws (77) and a Base Pad
(89) as shown.
Attach an additional Base Pad (89) to the Base
(81) with a 1" Tek Screw (77).
3. With the help of a second person, carefully tip
the treadmill onto its right side as shown.
Partially fold the Frame (26) so the treadmill is
more stable. Do not fully fold the Frame until
the treadmill is completely assembled.
Hold the Left Upright (70) near the Base (81).
Finger tighten a 2 3/4" Upright Bolt (85) and a 1"
Upright Bolt (84) with two 3/8" Star Washers (83)
into the bottom of the Left Upright (70). Do not
tighten the Upright Bolts yet.
4. Attach the other Front Endcap (80) to the Base
(81) with an Endcap Screw (108).
Attach the other Wheel Housing (86) to the Base
(81) with two 1" Tek Screws (77) and a Base
Pad (89) as shown.
Attach an additional Base Pad (89) to the Base
(81) with a 1" Tek Screw (77).
2
86
3
85
84
4
108
80
81
77
89
7
108
81
89
77
89
77
81
70
83
26
84
86
89
77
80