Healthrider Pro H250i Treadmill User Manual page 10

11. Tighten four Console Screws (67) into the Left
and Right Uprights (70, 76) and the console as-
sembly. Start all four Screws and then
tighten them; do not overtighten the Console
Screws.
See step 10. Tighten the six 3/4" Screws (23);
do not overtighten the Screws.
12. Slide the Left Handrail Cover (68) against the
console assembly. Attach the Left Handrail
Cover with two Cover Screws (52); do not
overtighten the Cover Screws.
Attach the Right Handrail Cover (74) in the
same way.
13. Lower the Uprights (70, 76).
See the inset drawing. Push the Uprights (70,
76) sideways so that the treadmill Frame (26) is
centered between the Uprights.
Firmly tighten the Upright Bolts (84, 85) on each
side of the treadmill.
11
Console Assembly
67
76
12
Console
Assembly
68
52
13
Side View
View From Above
70
10
67
70
74
52
70, 76
85
84
26
26
76