Fcc Information - Healthrider H92 E Elliptical Manual

HOW TO USE THE IFIT TRAINING MODE
The optional iFit Live module allows the console to
communicate with your wireless network and unlocks
exciting new features: download personalized work-
outs, create your own workouts, track your workout
results, and access many other features on the iFit
Live website. To purchase an iFit Live module at
any time, go to www.iFit.com or call the telephone
number on the front cover of this manual.
Note: To use the iFit Live module, you must have
access to a computer with an internet connection and
a USB port. You must also have your own wireless
network including an 802.11b router with SSID broad-
cast enabled (hidden networks are not supported). In
addition, you must have an iFit.com membership.
To select the iFit training mode, an iFit Live module
must be inserted in the console. Press the Menu button
and then press the increase and decrease buttons next
to the Enter button and highlight IFIT TRAINING. Then,
press the Enter button. For more information about
the iFit training mode, go to www.iFit.com.
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in the
iFit Live module must be at least 8 in. (20 cm) from
all persons and must not be near or connected to
any other antenna or transmitter.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug the included

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and the receiver.
•• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to
computer or peripheral devices. Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’'s authority to operate this equipment.
audio cable into the jack on the side of the console and
into a jack on your MP3 player or CD player; make
sure that the audio cable is fully plugged in.
Next, press the play button on your MP3 player or
CD player. Adjust the volume level using the volume
control on your MP3 player or CD player or press the
volume increase and decrease buttons on the console.
HOW TO USE THE INFORMATION MODE
The console features an information mode that allows
you to view usage information and to adjust the con-
trast level of the displays.
To select the information mode, press and hold down
the Display button for a few seconds until the informa-
tion mode appears in the display.
The display will show the
total number (in thousands)
of strides that have been
pedaled on the elliptical.
The display will also show
the total number of hours
that the elliptical has been
used.
The currently selected contrast level will also appear
in the display. Press the increase and decrease but-
tons next to the Enter button repeatedly to select the
desired contrast level.
Press the Display button to save the contrast level set-
ting and exit the information mode.
19