How To Use The Elliptical Exerciser - Epic Fitness El 1200 Elliptical User Manual

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO PLUG IN THE POWER CORD
This product must be grounded. If it should mal-
function or break down, grounding provides a path of
least resistance for electric current to reduce the risk
of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into an appro-
priate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances. This product is for use on a nominal
120-volt circuit. Important: The elliptical exerciser
is not compatible with GFCI-equipped outlets.
DANGER:
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
A temporary
adapter may
be used to
connect the
power cord
to a 2-pole
receptacle
as shown at
the right if a
properly
grounded
outlet is not
available. The temporary adapter should be used only
until a properly grounded outlet can be installed by a
qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
Improper connection
Grounded Outlet Box
Adapter
Lug
Metal Screw
HOW TO MOVE THE ELLIPTICAL EXERCISER
Due to the size and weight of the elliptical exer-
ciser, moving it requires two persons. Stand in front
of the elliptical exerciser, hold the upright, and place
one foot against one of the front wheels. Pull on the
upright and have a second person lift the handle on
the rear of the frame until the elliptical exerciser will
roll on the front wheels. Carefully move the elliptical
exerciser to the desired location, and then lower it to
the floor.
Lift here
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical
exerciser
rocks slightly
on your floor
during use,
Leveling
turn one or
both of the
leveling feet
beneath the
rear stabilizer
until the rocking motion is eliminated.
10
Pull on
upright
Place
your foot
here
Feet