Table of Contents
Advertisement
www.epicfit.com
Model No. EPEL19912.2
Serial No.
USER’'S MANUAL
Write the serial number in the space
above for reference.
Serial Number Decal
(on underside of frame)
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go to
www.epicfit.com/registration.
CUSTOMER CARE
For service at any time, go to
www.epicfit.com.
Chat: Mon.––Fri. 6 a.m.––7 p.m. MT
Email: productsupport@epicfit.com
Call: 1-855-EPIC-FIT
(1-855-374-2348)
Mon.––Fri. 6 a.m.––7 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for Epic Fitness A30e Elliptical
Summary of Contents for Epic Fitness A30e Elliptical
- Page 1 www.epicfit.com Model No. EPEL19912.2 Serial No. USER’’S MANUAL Write the serial number in the space above for reference. Serial Number Decal (on underside of frame) ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.epicfit.com/registration. CUSTOMER CARE For service at any time, go to www.epicfit.com.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . . 2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on the elliptical before using the elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 5: Before You Begin
A30E manual. To help us assist you, note the product model ™™ elliptical. The A30E elliptical provides an impressive number and serial number before contacting us. The selection of features designed to make your workouts model number and the location of the serial number at home more effective and enjoyable. -
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 7: Assembly
ASSEMBLY •• To watch an assembly •• Left and right parts are marked ““L”” or ““Left”” and video, go to ““R”” or ““Right.”” http://productvideo.co/ assembly/dsg/epic or •• To identify small parts, see page 6. use your mobile phone or smartphone to read In addition to the included tool(s), assembly the QR code at the right. - Page 8 3. Set the Rear Stabilizer (5) on the floor behind the Frame (1). Locate the wire tie in the Rear Stabilizer. See the inset drawing. Tie the end of the wire tie to the Sensor Wire Harness (155). Pull the other end of the wire tie until the Sensor Wire Harness (155) is routed through the Rear Stabilizer (5).
- Page 9 5. Untie and discard the wire tie (not shown) on the Sensor Wire Harness (155). Avoid pinching While a second person holds the Rear Stabilizer the Sensor Wire Cover (2) near the Rear Stabilizer (5), connect Harness (155) the wire on the Ultrasonic Sensor (147) to the Sensor Wire Harness (155).
- Page 10 7. While a second person holds the Upright (4) near the Frame (1), locate the wire tie in the Wire Wire Tie Upright. See the inset drawing. Tie the lower end of the wire tie to the Main Wire Harness (110). Pull the upper end of the wire tie until the Main Wire Harness (110) is routed through the Upright (4).
- Page 11 9. Identify the Right Pedal (49) and the Right Pedal Arm (58) and orient them as shown. Attach the Right Pedal (49) to the Right Pedal Plate (139) on the Right Pedal Arm (58) with four M6 x 14mm Screws (121) and four M6 Washers (90).
- Page 12 10. Using a plastic bag to keep your fingers clean, apply a generous amount of the included Grease grease to the Arm Axle (35) and to two Wave Washers (95). Insert the Arm Axle (35) into the Upright (4) and center it.
- Page 13 12. Tip: Avoid pinching the wires in the Right and Left Handlebars (83, 87). Attach the Right Handlebar (83) to the right side of the Console Bracket (62) with three M8 x 16mm Screws (72). Repeat this step with the Left Handlebar (87). Then, remove the packaging from the wires on the Right and Left Handlebars (83, 87).
- Page 14 14. Have a second person hold the Console (7) near the Console Bracket (62). Connect the Ground Wire (119) to the matching wire on the Console (7). Then, insert all of the Avoid pinching wires on the Console downward through the the wires indicated hole in the Console Bracket (62).
- Page 15 16. Slide the Lower Upright Cover (80) upward, and attach it to the Upright (4) with two M4 x 16mm Screws (104). 17. Attach the Accessory Tray Base (8) to the Upright (4) with two M4 x 16mm Screws (104). 18.
- Page 16 19. Press the Upper Upright Cover (91) onto the Lower Upright Cover (80). 20. Identify the Right Arm Upper Cover (67) and the Right Arm Lower Cover (68). Attach the Right Arm Upper Cover (67) to the Right Upper Body Leg (36) with an M4 x 16mm Screw (104).
- Page 17 22. While a second person tips the elliptical to the left and holds it, attach a Stabilizer Cap (134) to the right side of the Frame (1) with two M4 x 16mm Screws (104). Next, tighten a Leveling Foot (92) into the Frame (1) in the indicated location.
-
Page 18: How To Use The Elliptical
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should malfunc- be used to tion or break down, grounding provides a path of least connect the Adapter resistance for electric current to reduce the risk of... - Page 19 HOW TO MOVE THE ELLIPTICAL HOW TO ADJUST THE POSITIONS OF THE PEDALS Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, Each pedal can be adjusted to several positions. To hold the upright, and place one foot against one of the adjust each pedal, lift the pedal and turn the pedal wheels.
- Page 20 HOW TO LEVEL THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL If the elliptical rocks slightly on your floor during use, To mount the elliptical, hold the upper body arms or turn one or both of the leveling feet beneath the rear the handlebars and step onto the pedal that is in the stabilizer until the rocking motion is eliminated.
- Page 21 CONSOLE DIAGRAM FEATURES OF THE CONSOLE The console also offers user-defined workouts that allow you to create your own workouts and store them The advanced console offers an array of features in memory for future use. designed to make your workouts more effective and enjoyable.
-
Page 22: To Turn On The Power
HOW TO TURN ON THE POWER HOW TO SET UP THE CONSOLE IMPORTANT: If the elliptical has been exposed to Before using the elliptical for the first time, set up the cold temperatures, allow it to warm to room tem- console. - Page 23 HOW TO USE THE MANUAL MODE Calories per Hour (Calories/Hr)——This display mode will show the approximate number of calories 1. Begin pedaling or press any button on the you are burning per hour. console to turn on the console. Distance——This display mode will show the dis- See HOW TO TURN ON THE POWER on tance that you have pedaled in miles or kilometers.
- Page 24 To pause the manual mode or a workout, stop ped- 5. Measure your heart rate if desired. aling. The time will pause in the display. To resume the manual mode or the workout, simply resume If there are sheets of plastic on the metal pedaling.
- Page 25 HOW TO USE AN ONBOARD WORKOUT If the resistance level or incline level for the current segment is too high or too low, you can manu- 1. Begin pedaling or press any button on the ally override the setting by pressing the Quick console to turn on the console.
- Page 26 HOW TO USE A SET-A-GOAL WORKOUT HOW TO CREATE A USER-DEFINED WORKOUT 1. Begin pedaling or press any button on the 1. Begin pedaling or press any button on the console to turn on the console. console to turn on the console. See HOW TO TURN ON THE POWER on See HOW TO TURN ON THE POWER on page 22.
- Page 27 HOW TO USE A USER-DEFINED WORKOUT automatically adjust to the incline level pro- grammed for the next segment. 1. Begin pedaling or press any button on the console to turn on the console. The workout will continue in this way until the last segment ends.
-
Page 28: To Use An Ifit Workout
HOW TO USE AN IFIT WORKOUT Note: The calorie goal is an estimate of the number of calories that you will burn during Note: To use an iFit workout, you must have access to the workout. The actual number of calories that a wireless network (see page 29). -
Page 29: To Change Console Settings
HOW TO CHANGE CONSOLE SETTINGS Units——The selected unit of measurement will appear in the matrix. To change the unit of mea- The console features a settings mode that allows you surement, press the Enter button. To view distance to view usage information, to personalize console set- in miles, select ENGLISH. - Page 30 iFit User Setup——To set up a different iFit account, Press the up, down, left, and right buttons to high- but maintain the existing wireless connection, fol- light the desired letter or number. Then, press the low the instructions in the matrix. Enter button to select the letter, number, or symbol.
- Page 31 Then, cycle the power of the elliptical: press the Your browser will load a web page. If the web page power switch on the elliptical to the off position, does not appear, double-check the IP address and wait for several seconds, and then press the power the previous instructions of this step.
-
Page 32: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15C and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 33: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING IMPORTANT: Servicing other than the procedures HOW TO ADJUST THE DRIVE BELT described below should be performed only by an authorized service representative. If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive Inspect and tighten all parts of the elliptical regularly. - Page 34 HOW TO ADJUST THE REED SWITCH Loosen, but do not remove, the two indicated M4 x 16mm Screws (104). Slide the Reed Switch (38) If the console does not display correct feedback, the slightly closer to or away from the Magnet (43). Then, reed switch should be adjusted.
-
Page 35: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. - Page 36 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch; never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
- Page 37 NOTES...
- Page 38 NOTES...
-
Page 39: Part List
PART LIST Model No. EPEL19912.2 R0113A Key No. Qty. Description Key No. Qty. Description Frame Roller Rear Stabilizer Cover Console Knob Ramp Axle Cover Upright Left Arm Upper Cover Rear Stabilizer Left Arm Lower Cover Front Stabilizer Upper Handlebar Cover Console Roller Arm/Pedal Arm Bushing Accessory Tray Base... - Page 40 Key No. Qty. Description Key No. Qty. Description Idler Screw Left Pedal Adjustment Bracket M8 Locknut Pedal Arm Flex Bracket Ultrasonic Sensor Bracket Flex Bracket Cover M4 x 16mm Screw Left Pedal Plate M8 x 16mm Hex Screw Right Pedal Plate Small Pulley Spacer Pedal Plate Spring Large Standoff...
-
Page 41: Exploded Drawing
EXPLODED DRAWING A Model No. EPEL19912.2 R0113A... - Page 42 EXPLODED DRAWING B Model No. EPEL19912.2 R0113A...
- Page 43 EXPLODED DRAWING C Model No. EPEL19912.2 R0113A...
-
Page 44: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...
Need help?
Do you have a question about the A30e Elliptical and is the answer not in the manual?
Questions and answers
moved the elliptical machine from lower level of our home to main floor. Plugged it in and it does not come on, on /off switch does not light up and display panel does not light
If the Epic Fitness A30e Elliptical does not turn on after moving it to a different floor, the issue could be that it was exposed to cold temperatures. The console must be allowed to warm to room temperature before turning on the power. If not, the console displays or other electrical components may be damaged.
This answer is automatically generated
My EPIC Elliptical sounds like it needs to be lubricated but I don't see any grease ports on the outside. The manual doesn't address this. Help.
To lubricate the Epic Fitness A30e Elliptical, apply grease directly to components during assembly where indicated. For example, grease should be applied to the Pedal Arm Axle (24) before inserting it and securing it with screws and washers. If there are no visible grease ports, lubrication should be done manually at pivot points and moving joints by disassembling necessary parts and applying grease where metal parts move against each other.
This answer is automatically generated