Hardware; Part Identification Chart - Epic Fitness A35e Elliptical Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M6 Washer
Wave Washer M8 Jam Nut
(90)––8 M8 x 23mm M10 x 25mm
(94)––4
(95)––2
Washer (98)––2 Washer (148)––4
M4 x 16mm M6 x 14mm M8 x 16mm M8 x 35mm
Screw
Screw (121)––8 Screw (72)––19 Bolt (96)––4
(104)––17
M10 x 105mm
M10 x 16mm
Screw (84)––2
Screw (33)––4
6