Epic Fitness A30t Treadmill Manual page 14

HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console display
or other electrical components.
Plug in the power cord (see
page 12). Next, locate the
power switch on the treadmill
frame near the power cord.
Make sure that the switch is
in the reset position.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. If the displays light as soon as
you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see HOW TO CHANGE CONSOLE
SETTINGS on page 21 to turn off the demo mode.
Next, stand on the foot
rails of the treadmill.
Locate the clip attached
to the key, and slide
the clip securely onto
the waistband of your
clothes. Then, insert the
key into the console.
After a moment, the
displays will light. IMPORTANT: In an emergency,
the key can be pulled from the console, causing
the walking belt to slow to a stop. Test the clip by
carefully taking a few steps backward; if the key is
not pulled from the console, adjust the position of
the clip.
Note: The  rst time you insert the key into the console,
the incline may automatically rise to the maximum
incline level and then return to the minimum incline
level. This will calibrate the incline of the treadmill. If
the incline does not automatically change, see step 4
at the right.
Note: The console can display speed and distance
in either miles or kilometers. To  nd out which unit
of measurement is selected or to change the unit of
measurement, see HOW TO CHANGE CONSOLE
SETTINGS on page 21. For simplicity, all instructions
in this section refer to miles.
Reset
Clip
Key
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Create an iFit account.
To create an iFit account, or for more information
about the account, go to www.iFit.com.
2. Connect to your wireless network.
Note: In order to download iFit workouts and use
several other features of the console, you must be
connected to a wireless network. See HOW TO
CHANGE CONSOLE SETTINGS on page 21 to
connect the console to your wireless network.
3. Check for firmware updates.
See HOW TO CHANGE CONSOLE SETTINGS on
page 21 and check for firmware updates.
4. Calibrate the incline.
See the troubleshooting symptom “"The incline
of the treadmill does not change correctly”" on
page 26 and calibrate the incline of the treadmill if
necessary.
5. Adjust the angle of the console as desired.
Adjust the angle of the console by pressing on the
handle on the top of the console and pulling the
console all the way toward you. Then, ease the
console downward to the desired angle.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 15. To use an
onboard workout, see page 17. To use a set-a-goal
workout, see page 18. To create a user-defined
workout, see page 18. To use a user-defined work-
out, see page 19. To use an iFit workout, see page
20. To change console settings, see page 21. To
use the stereo sound system, see page 23.
14