20
Attaching the bodypack transmitter to clothing
The bodypack transmitter is best attached to e.g. the belt with
clip
.
The clip is detachable so that you can also attach the transmitter
with the antenna pointing downwards. To do so, withdraw the clip
from its fixing points and attach it the other way round.
Switching the transmitter on/off
Slide back the cover plate
Press the
ON/OFF
button
LED
lights up.
To switch the transmitter off, press the
"OFF" appears on the display. You can then release the button.
The red LED
goes off.
Muting the transmitter
Use the
MUTE
switch
signal (this switch does not switch off the transmitter).
Signal and battery status indication
The yellow LED "AF PEAK"
if the audio signal at the AF input is excessively high (AF peak).
The red LED "ON / LOW BAT"
on the display provide information on the battery status.
.
to switch the transmitter on. The red
ON/OFF
to noiselessly mute the transmitter's audio
at the top of the transmitter lights up
and the lower 8-segment bargraph
button
until