GBC 1264WF/1244WF
Section 6: Know your Laminator
This section is intended to aide the user in becoming more familiar with the 1244 WF & 1264
WF laminators. Refer back to this section if you have questions regarding references to certain
parts of the laminator in this laminator.
1.) Safety Shield
2.) Control Panel
3.) Feed Table
4.) Lower Film Shaft/Unwind Shaft
5.) Upper Film Shaft/Unwind Shaft
6.) Unwind Brake
7.) Pressure Plate
8.) Emergency Stop/E-Stop
© 2006 General Binding Corporation
9.) Rewind Clutch Adjustment Knob
10.) Rewind Shaft & Rewind Tube
11.) Rear Slitter
12.) Power Switch
13.) Foot Pedal
14.) Power Cord
15.) Web Clutch
16.) Roller Lift Handle/Gap Adjustment Handle
Operation Manual
Page 13