Select And Change Nip Settings - GBC Titan 1244WF Installation & Operating Manual

GBC 1264WF/1244WF Operation Manual
Select and Change the Nip
The Roller Handle raises and lowers the
Main Rollers and Pull Rollers
simultaneously. The Roller Handle Guide is
notched with preset nip heights. The Roller
Handle is located on the right side of the
laminator.
Keep hands and fingers clear of the
laminator roller nip when changing the gap.
You can be crushed or burned.
Never leave the rollers in the down position
without rotating. Prolonged contact in one
area can form flat spots on the rollers.
To change the nip opening, pull the handle
away from the notch and move to the
desired setting and secure the handle in the
appropriate notch.
Lift the handle to the top position to open
the rollers.
© 2006 General Binding Corporation Page 24