Laminator Control Panel - GBC 5031TS ROLL Instruction Manual

GBC 5031TS

LAMINATOR CONTROL PANEL

GBC 5031TS Functional Parts Definition
Figure 11
2. CONTROL PANEL: Located front, right side of the laminator
Figure 12
© 2006 General Binding Corporation
A
A
B
C
D
E
F
OPERATION MANUAL
LAMINATOR ON/OFF SWITCH (Figure 11)
A. Turns the Laminator ON/OFF
POWER SWITCH:
Located on the back of the machine-applies
power to the laminator. The LCD display panel
will illuminate when position marked "I" is
pushed. The off position, marked "O", removes
power from the laminator.
A. Nip Roller Up/Down:
Nip Roller Up/Down Heat Control Buttons
B. Measure:
Measures running temperature
C. Cooling:
Turns the cooling fans ON/OFF. Fans will
automatically shut off when STOP is pressed
D. Run:
Turns the drive motor ON
E. Stop:
Turns the drive motor OFF
F. Reverse:
Places the drive motor in reverse. Press and
hold to reverse the motor.
9