Loading Cutlery And Dishes - Zanussi ZSF2450 User Manual

Caution! Do not fill the rinse aid dispenser with
other products (e.g. dishwasher cleaning agent,
liquid detergent). There is a risk of damage to the
appliance.

Loading cutlery and dishes

Helpful hints and tips
Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb
water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do these steps:
– Load hollow items (e.g. cups, glasses and pans)
with the opening down.
– Make sure that water does not collect in the con-
tainer or in a deep base.
– Make sure that cutlery and dishes do not lie inside
one another.
– Make sure that cutlery and dishes do not cover other
cutlery and dishes.
– Make sure that glasses do not touch other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings can
keep water droplets.
• Plastic items do not dry as well as porcelain and steel
items.
• Put light items in the main basket. Make sure that the
items do not move.
Caution! Make sure that the spray arm can move
freely before you start a washing programme.
8
Adjusting the dosage of rinse aid
Primary basket
1
Arrange items on and be-
low the cup racks. For lon-
ger items fold the cup
racks up.
Cutlery basket
Warning! Do not put long-bladed knives in a ver-
tical position to prevent injury.
Arrange long and/or sharp items of cutlery horizontally
in the primary basket. Be careful with sharp items such
as knives.
The rinse aid dial is set at
the factory at position 1.
To increase or decrease
the dosage refer to 'What
to do if...'
Arrange the deep dishes
and large lids around the
edge of the basket. Ar-
range the items to let water
touch all surfaces.