Loading Cutlery And Dishes - Zanussi ZDI112 User Manual

Different brands of detergent dissolve in different
times. Some detergent tablets do not have the best
cleaning results during short washing programmes. Use
long washing programmes when you use the detergent
tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the dishes with-
out streaks and stains.
The rinse aid dispenser automatically adds rinse aid dur-
ing the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1. To open the rinse aid dispenser, turn the cap
counterclockwise
2. Fill the rinse aid dispenser
mark 'max' shows the maximum level.
3. Remove the spilled rinse aid with an absorbent cloth
to prevent too much foam during the washing pro-
gramme.
4. To close the rinse aid dispenser, put the cap in posi-
tion and turn it clockwise.
Fill the rinse aid dispenser when the indicator
becomes clear.
Adjust the rinse aid dosage
Factory set: position 3.

Loading cutlery and dishes

Hints and tips
• Do not put in the appliance items that can absorb water
(sponges, household cloths).
• Remove the remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that water does not collect in containers or
in bowls.
• Make sure that cutlery and dishes do not bond togeth-
er.
• Make sure that the glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to prevent them to
bond together.
4
6
with rinse aid. The
5
You can set the rinse aid dosage between position 1 (low-
est dosage) and position 4 (highest dosage).
Turn the rinse aid selector
dosage.
Using combi detergent tablets
These tablets contain agents as detergent, rinse aid and
dishwasher salt. Some types of tablets can contain other
agents.
When you use tablets, that contain salt and rinse aid, do
not fill the salt container and rinse aid dispenser.
Be sure that these tablets are applicable for the water
hardness in your area (refer to the instructions on the
packaging of the products).
1. Adjust the water hardness to the lowest level. Refer to
'Setting the water softener'.
2. Set the rinse aid dosage to the lowest position. Refer
to 'Use of detergent and rinse aid'.
Using again separately detergent, salt and rinse aid
1. Fill the salt container and the rinse aid dispenser.
2. Adjust the water hardness to the highest level.
3. Start a washing programme without dishes.
4. When the washing programme is completed, adjust
the water softener to the water hardness in your area.
5. Adjust the quantity of rinse aid.
• When you put the items in the baskets, make sure that
the water can touch all surfaces.
• Put light items in the upper basket. Make sure that the
items do not move.
• Water droplets can collect on plastic items and non-
stick pans.
7
to increase or decrease the
9