Other Features; Remote Hold Release; Out-Of-Range Warning; Channel Changing - IBM -3460 Installation And Operating Manual

OTHER FEATURES

Using the Intercom/Handset Finder (PAGE)
1. Press P/INTERCOM on the base. If the handset is
within range, the handset will beep for 20 seconds. The
display will flash "INTERCOM."
2. Press T to answer and have an Intercom conversation with the base.
3. Press any other key on the handset to stop the page/find feature.

Remote Hold Release

When a line is placed on hold, any other phone on that line can be used to
access the call and hold will be broken from the IBM-3460.

Out-of-Range Warning

If you venture too far from the base, the handset will beep and the display will
show "OUT OF RANGE." Reverse your direction to re-establish connection
with the base or the call will be dropped. When the base detects that the
handset has been out of range for 15 continuous seconds it will release the
engaged line.

Channel Changing

If you are experiencing interference during a telephone call, press the c key.
The IBM-3460 will scan up to 50 channels and select the clearest one to provide
the best possible reception.
INTERCOM
12/08 11:46
33
AM

GLOSSARY

.
.
34