Table of Contents
Advertisement
MESSAGE WAITING
If you subscribe to voice mail from the telephone
company and if there are voice messages that
have been left in your voice mailbox, the display
will show "MESSAGE WAITING."
Note: This function requires voice mail subscription from the local telephone
company. Furthermore, the local phone company must provide a type of
voice mail signaling called "FSK." Not all telephone companies have the
visual message waiting feature available. Please contact your local
telephone company to check if this is available in your area.
Tip:
If you wish to delete the "Message Waiting" message, delete all the Caller ID
messages (see "Deleting Caller ID Records" on page 39).
New Call Light
When you receive new Caller ID or voice mail message, the New Call light will
flash accordingly.
• For Caller ID, the New Call light will flash
quickly to indicate that you have a new Caller
ID call stored in memory.
• When you have a voice message waiting the
New Call light will flash at a slow rate.
Jan 01
Monday
USERNAME 12:28AM
Message Waiting
MEM
New Call Light
41
Using the Handset Finder (PAGE)
1. Press P on the base. If the handset is within range, the handset will
beep for 20 seconds.
2. Press any key on the handset to stop the page/find feature.
CID
Out-of-Range Warning
If you venture too far from the base, the handset will beep and the display will
show "OUT OF RANGE." Reverse your direction to re-establish connection
with the base or the call will be dropped. When the base detects that the
handset has been out of range for 15 continuous seconds it will release the
engaged line.
Note: When the base loses power, the handset will also beep and display
"OUT OF RANGE." If this indication occurs when the phone is not in
use, make sure the base is being properly supplied with power.
OTHER FEATURES
42
Advertisement
Table of Contents
