Basic Displays; Basic Operation; Making Calls; Additional Options - IBM -3460 Installation And Operating Manual

BASIC DISPLAYS

Handset Idle
Channel
CHANNEL 50
12/08 11:46
AM
Channel Changing
SCANNING
12/08 11:46
AM
Line Ringing
RINGING
12/08 11:46
AM
Connecting
CONNECTING
12/08 11:46
AM
Line on Hold
LINE ON HOLD
12/08 11:46
AM
Call Timer
00 02 50
: :
12/08 11:46
AM
New CID Received
Speakerphone in Use
SPEAKER PHONE
12/08 11:46
AM
19

BASIC OPERATION

Making Calls

Using the handset:
1. Pick up the handset from the base.
2. Press T. The display will show "CONNECTING."
Once the IBM-3460 has acquired a line the display
will show the channel that it is using (eg.
CHANNEL 50). Wait until you hear a dial tone.
3. Dial the number you wish to dial.
Note: You can pre-dial the number before you press
the T key. The number displayed will be dialed
once T is pressed.
4. After 15 seconds of the line being active the
display will show the call timer.
5. When you are finished talking, press the T key or
place the handset back into the base to end the call.The call timer will
display for a short time after the call has finished.
Note: The IN USE light on the base will illuminate when the handset is active.
Using the speakerphone:
1. Press S. The Speaker LED will light. Wait
until you hear a dial tone.
2. Dial the number you wish to dial.
3. When you are finished talking, press the S
key to hang up.

Additional Options

To: Do This:
Press the * key after the phone is in use. The phone will remain in
Switch to temporary tone dialing
tone dialing mode for the duration of the call.
Press F to go to the new caller.
Receive a call waiting call
Press F again to go back to the original caller.
Press + - during a call until the desired volume level is reached.
Adjust the call volume
On the handset only:
Press the H key.
Place a call on hold
Press T or S to pick up the line on hold.
Press D, wait 10 seconds or place the handset back on the base.
Delete a pre-dialed number or digit
MENU
HOLD
DELETE
Talk Key
CID
VOLUME
1 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
PQRS TUV WXYZ
7 8 9
Temporary
TONE OPER
0 #
Tone Key
FLASH CHAN MEM REDIAL
Flash Key NEW
CALL
FLASH
1
4 GHI
CHARGE
PAGE
7 PQRS
INTERCOM
IN USE
TONE
POWER
SPEAKER
SPEAKER
Speaker Key
20
Delete Key
Up/Down Keys
Dial Pad
Redial Key
MUTE REDIAL
2 ABC 3 DEF
5 JKL 6 MNO
8 TUV 9 WXYZ
0
OPER
VOL